SUMITOMO CQTM43-25F-7.5-1-7-S1249-D Double Gear Pump

Weight:1.611 lbs; construction description:Guardian® Flange; width:0.7000 in; D:3.7400 in; typical application:Exceptional Bearing; maximum shaft surface speed:12000 fpm; misalignment tolerance:0.020 in; shaft diameter:2.7529 in; pressure tolerance:Ambient; lip material:Labyrinth;

radial static load capacity:8150 lb; maximum rpm:4100 RPM; replacement bearing:2-24D; lubrication type:Lubrication Fitting; expansion type:Non-Expansion Bearin; housing material:Cast Iron; d:2.2500 in; operating temperature range:+200 to +4; seal type:Felt Seal; mounting:Two-Bolt Base;

shank thread size:3/4-16 in; ball width:.8750 in; series:CFM; lubrication type:With Lubrication Fit; ball material:Alloy Steel - heat t; length to ball center:2.8750 in; axial static load capacity:1400 lb; race material:None; thread direction:Left Hand; head width:.6870 in;

d:3/4 in; overall length:5 in; harmonization code:732690; D:1-15/16 in; material specification:SAE 863, FC-2000-K30; material:Sintered Iron-Copper; iso grade:9001:2008 &; series:FCCS; standards met:RoHS, REACH, DRC Con;

radial static load capacity:268 kN; radial dynamic load capacity:250 kN; cage material:Brass; bearing material:Steel; closure type:Open; maximum rpm (oil):2400 rpm; maximum rpm (grease):1800 rpm; d:130 mm; fillet radius:4 mm; D:280 mm;

B:11mm; Reference Speed Rating (r/min):16000; Clearance:C3; Dynamic Load Rating (kN):20.3; Limiting Speed Rating (r/min):10000; Seals or Shields:Open Type; d:55mm; SKU:16011/c3-skf; Availability:In Stock; Fatigue Load Rating (kN):0.695;

unit standoff:1-53/64 in; shaft centerline height:2-3/8 in; horizontal bolt spacing:2 in; radial dynamic load capacity:5820 lbf; series:UCMFB200MZ2RF; housing material:304 Cast Stainless S; seal type:Dual Lip with Slinge; locking device:Set Screw; replacement bearing:UC207-23MZ2RF; bolt si

maximum v value:0.85 m/s SFPM; series:80M; operating temperature range:-40 to 176 °F; material:Polyacetal; standards met:RoHS; material specification:80; overall length:500 mm; maximum p value:17.5 N/mm²; maximum pv value:2.45 N/mm²;

Weight:0.27 lb; harmonization code:3926904500.US; D:3.2500 in; pressure tolerance:Ambient; typical application:Exceptional Bearing; lip material:Labyrinth; misalignment tolerance:0.020 in; continuous temperature range:-22 to 400°F; maximum shaft surface speed:4500 fpm; shaft diameter:2.2619 in;

roller material:Chrome Steel; stud diameter:10 mm; stud type:Standard; head type:Hex; manufacturer upc number:637400618476; lubrication hole location:Stud End; thread size:M10 x 1; stud length:23 mm; finish/coating:Black Oxide; closure type:Sealed;

bearing type:Spherical Roller; bore type:Round; overall height:11.4500 in; radial static load capacity:237000 lbs; finish/coating:Powder Coat; D:16.5650 in; bolt size:1.0000 in; series:QVPH; manufacturer upc number:883450343817; mounting:Four-Bolt Base;

TypeFlat BeltMaterialSteelPlace of OriginShandong, ChinaSurface treatmentAnti-rust Oil,Galvanized, Powder coating, Plainting, PolishingColorBlack,Transparent,Golden etc.Tolerance+/-0.01mm,or according to the customers'requirements.CertificateISO9001,TUV,BV,SGSKeywordgroove pulleyinternal

Weight:8.30 KGS; Availability:In Stock; Dynamic Load Rating (kN):606; Reference Speed Rating (r/min):3400; SKU:22318kejw33-timken; Limiting Speed Rating (r/min):2900; Clearance:Standard; B:64mm; Static Load Rating (kN):659; D:190mm;

maximum v value:1200 (sfm); D:2-1/4 in; manufacturer catalog:Click here; groove/plug type:None; maximum p value:Static 8000 / D; overall length:1-1/2 in; operating temperature range:-35 °F to +; sleeve bearing type:Plain Sleeve; d:2 in; bearing material:Oil-Impregna

bearing material:Oil-Impregnated Expa; maximum p value:10 N/mm2; D:28 mm; additional details:Lead Free; maximum v value:Periodic lubrication; series:30F; maximum pv value:Periodic lubrication; d:20 mm; D:38 mm; operating temperature range:Periodic lubrication;