TIMKEN Feb-85 Tapered Roller Bearings

A:40 mm; L:152 mm; Mass bearing unit:1.05 kg; B:38.1 mm; Recommended tightening torque for grub screw:4 N·m; s1:22.2 mm; J6:140 mm; N1:14 mm; Hexagonal key size for grub screw N:3 mm; Basic dynamic load rating C:19.5 kN;

Appropriate attachment bolt size G:1 in; H2:76.2 mm; Max. speed for Taconite seal:460 r/min; Adapter sleeve assembly:SNW 36x6.3/8; R1:114.3 mm; h:60.325 mm; Cap bolt, SAE grade:8; Taconite seal:TER 147; S:4.763 mm; P60°:535 kN;

Basic Interchange BCA:-; Speed Rating-Single and Double Sealed Grease SDG:23000 rpm; D:24.0000 mm; Width - Overall B:10.3 mm; Basic Radial Load Rating-Dynamic DC:3320 N; Width - Inner Ring B1:9.80 mm; Basic Interchange FAF:38KVL; Accessories:8000 One Seal; d:8.000 mm; Old MRC Bearing Number:38FS1;

Max. speed for PosiTrac Plus seal:875 r/min; H1:190.5 mm; H:377.825 mm; Bearing:22236 CCK/W33; ba:75.406 mm; PosiTrac Plus contact element:2 x B10724-148; Cap bolt:1-8 UNC; Da:319.999 mm; P150°:173 kN; PG:1/4 NPT;

Accessories:One Shield; B:52.40 mm; Basic Static Radial Load Rating Co:193000 N; D:160.0000 mm; Sealed Speed Rating n3:2400 rpm; Oil Speed Rating n2:3400 rpm; d:90.000 mm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:151000 N; Grease Speed Rating n1:2400 rpm;

Grease Speed Rating n1:3400 rpm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:4500 rpm; B:54.00 mm; Sealed Speed Rating n3:3400 rpm; Basic Dynamic Radial Load Rating C:134000 N; Accessories:One Seal; d:60.000 mm; D:130.0000 mm; Basic Static Radial Load Rating Co:143000 N;

Grease Speed Rating n1:6300 rpm; Accessories:Two Seals & Snap-Rin; B:33.30 mm; d:30.000 mm; D:72.0000 mm; Oil Speed Rating n2:8500 rpm; Basic Dynamic Radial Load Rating C:41600 N; Basic Static Radial Load Rating Co:29000 N; Sealed Speed Rating n3:6300 rpm; Fillet Radius ra:1.00 mm;

d:55 mm; da min.:61 mm; Limiting speed:4300 r/min; Calculation factor kr:0.5; d1 ≈:68.5 mm; ra max.:1 mm; r1,2 min.:1.1 mm; Fatigue load limit Pu:34.5 kN; r3,4 min.:0.6 mm; Reference speed:3400 r/min;

Basic Static Radial Load Rating Co:73500 N; B:28.00 mm; Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:2400 rpm; Accessories:Shield & Seal; D:170.0000 mm; Grease Speed Rating Open/Shielded n1:3800 rpm; Oil Speed Rating Open/Shielded n2:4500 rpm; d:110.000 mm; Basic Dynamic Radial Load Rating C:818

r1,2 min.:6 mm; da min.:416 mm; Da max.:694 mm; Mass bearing + sleeve:470 kg; Basic static load rating C0:10400 kN; d2 ≈:500 mm; G1:44 mm; D1 ≈:615 mm; Calculation factor Y2:2.9; B1:302 mm;

A2:250.825 mm; Taconite seal:TER 113; Eye bolt:2 x 3/8-16 UNC; P90°:149 kN; Mass pillow block:64 kg; H2:53.975 mm; Da:215.001 mm; S:4.763 mm; Ca:67.793 mm; Cap bolt:5/8-11 UNC;

Corrosion protection:Zinc-coated housing; Flange design:Flange with attachme; Basic dynamic load rating C:20.8 kN; B:29.5 mm; Sealing system:5-lip seal on flange; Housing material:Sheet steel; Maximum disc diameter max.:500 mm; D1:55 mm; Recommended lower temperature limit for storage (static):-50 &

d:200.000 mm; Sealed Speed Rating n3:0 rpm; Basic Static Radial Load Rating Co:95000 N; Fillet Radius ra:1.50 mm; Oil Speed Rating Open/Shielded n2:2800 rpm; D:250.0000 mm; B:24.00 mm; Basic Dynamic Radial Load Rating C:76100 N; Accessories:One Shield; Grease Speed Rating Open/Shielded n1:2200 rpm;

Accessories:One Seal; Fillet Radius ra:4.00 mm; B:65.00 mm; Basic Static Radial Load Rating Co:585000 N; Oil Speed Rating Open/Shielded n2:1100 rpm; d:420.000 mm; D:560.0000 mm; Grease Speed Rating Open/Shielded n1:900 rpm; Basic Dynamic Radial Load Rating C:351000 N; Sealed Speed Rating n3:550 rpm;

Mass adapter sleeve assembly:2.85 kg; B:19.304 mm; Lock washer:W 20; B4:21.438 mm; Sleeve:S 120x3.3/8; d:100 mm; B1:100.609 mm; d1:85.725 mm; Lock nut:AN 20; G:99.517 mm;